Power XL Issue
#2
By: Coach XXX
Q: I have been bodybuilding for 5 years
and my favorite lift is the bench press. I like to max out on the
bench at least once a week. My best bench is 350 but I have been
stuck there for a long time and nothing is making it increase. I
have heard that is not a good idea to do but I really like trying
to see if it is going up or not. I am very slow when going for
a max and was wondering why this is? It seems to take forever to
complete the lift as I am fighting it all the way. I do about 20
sets for chest and was wondering if this was too much when looking
to increase my strength. Thanks for all your help
Sincerely,
Vito Crisafulli
A: Hey Vito it’s good to hear from you. Now looking over your question
about your training problem all I can say you are going now where
fast because you don’t have a clue on what the hell you are doing.
Sorry to be so blunt but the fact remains you are not training properly
and your ass monkey program is not going to increase your strength
in the bench press or anything else. If anything you are actually
doing the exact opposite of what you should be when looking to increase
your bench. Let‘s take a quick look at some of the different mistakes
that you are making

If you are struggling this then you don’t know what you are
doing!
Mistake # 1 Maxing Out Too Often
Your first mistake is that you are maxing out on
the bench press way too often. Think about it here for a minute. You
are actually telling me that you hit an all out max once a week. Why
the hell would you do that? Do you really think you are going to get
stronger from week to week? You really don’t have a clue when it comes
to the strength sciences and your training shows it. Even powerlifters
whose goal is to constantly get stronger only max out on a contest
lift probably every 12 weeks or so. So why are you doing it every
week? The only thing that this is going to do is set you up for a
nice Pec tear. Stop maxing out as this is the first thing that is
destroying your strength progression
Mistake #2 Training at Too High of a Max Percentage
The second mistake with your bench press
training is that you can’t train more than 6 weeks with over 90% of
your max on any lift, and expect it to increase your strength. This
will not happen at all I guarantee it and your strength level will
actually decrease. Training with too high of a percentage of your
max will cause overtraining and wear out your nervous system. This
is why most of my bench pressers use only 50-65% of their max during
most of their training and still get stronger. Don’t get fooled into
thinking that you always have to bench heavy to get a bigger bench,
it’s just not true.

Training too heavy too often will lead you to failure!
Mistake #3 Not Training for Explosive Strength
Since you lift heavy every chest workout and max out
you are only training one part of your bench press. You are working
on your max strength, yet you are not focusing on
your explosive strength. If you want a massive bench
you have to train for speed even more than you think. If you don’t,
the bar will either staple you to the bench or it will come up very
slow. The way that I train my athletes for speed is to perform 8 sets
of 3 repetitions with 55-65% of their 1 rep max in the bench. You
should rest no longer than 45 seconds in between sets. This will cause
you not only to be a faster more explosive lifter but it will also
increase your conditioning so that you can handle increased volume.
Mistake #4 Not Benching with an Explosive Technique
Another blunder that you are not aware of is the fact
that you are not performing the bench press in an explosive manner.
This is very important in improving your 1 rep max in the bench. You
need to make sure that each and every repetition is done with compensatory
acceleration. Just in case you are not in the know, compensatory
acceleration training or what is known as “CAT” is
a scientific term for explosive training. This form of training
is best performed in the 55% - 80% range of your 1 rep max. It is
in this percentage range that the greatest amount of power is generated
for each specific lift. The proper way to perform CAT involves
two phases. You must lower the weight (eccentric contraction) with
a normal controlled tempo or speed. Once the bar touches your
chest, you must very quickly change directions and explosively move
the weight upwards (concentric contraction).

If you are not training to be explosive then you will always
be slow!
Mistake #5 Where is the Volume?
Man how many mistakes do I have to go through with this disaster
program that you are following? Another one of your problems is that
your overall training volume is way too low. One rule of thumb for
increased power is that you have to continually improve your volume
or total workload for your bench press workout for you to get stronger.
When your volume load is low, you can only expect to have a crappy
bench press. With the above scenario that you sent me, you perform
one set at 135 for 8 reps, 225 for 5 and then 315 for 3 reps and then
350 for 1 all out max. If you calculate your total volume you are
lifting a total of 3,500 pounds per bench press workout. By following
the above outlined principle, using 205 pounds for 8 sets of 3 reps
(65% of 315) with 2 warm up sets at 135 for 8 reps and 185 for 5 reps,
you are lifting 7,075 pounds per workout. As you can see you are doing
over double the amount of volume in the second properly designed plan
compared to the all out mess of a training program that you have designed.
So which one do you think will get you the results you are looking
for?

Train hard but train smart for that big bench!
Mistake #6 Overtraining but going Nowhere!
Lastly, you are over training your bench
press due to the fact that you are using too high of a percentage
of your 1 rep max for extended periods. Think about it for a second.
You are not doing enough total work or volume but in the end you are
overtraining and not getting results. Do you see how much your program
sucks the big one?
What you need to do is take some time off from heavy benching and
focus on your speed work on one day. This will develop your speed
and explosive strength. On the second day you should concentrate on
working with maximal weights but not on the bench press. This should
be on exercises that mimic the bench press and work sections of the
lift that are your weak points. Here you will perform one of the below
exercises for no more than 3 weeks in a row working up to a one rep
max, each week trying to set a new PR. This includes exercises such
as board presses, floor presses, reverse band presses, cambered bar
presses, close grip lockouts and many more.

Try new exercises to take your bench to the next level!
Conclusion
Ok as you can see here you need a total revamp of your bench press
training. Like most bodybuilders even though they may sport a big
chest very few of them actually know how to properly increase their
bench. Hell most of them don’t even know how to bench properly but
that is another column in itself. Throw that shitty routine that you
probably got out of some magazine in the trash since it didn’t help
you out very much. Now give my tips a try and you are going to see
a major difference in your results in even the first month of training
with some science behind you not just an inflated ego!

Keep following your program if this is the kind of max you
want!
|